手板模型設計過程中，產品成分需要修飾，或在模塑時將信息輸入，或在成型后將信息附加到手板模型上，這些都需要在各自的草圖多面描述、細化、說明。下面濟南手板廠家就來分析手板模型設計過程中的產品修飾內容。

In the process of prototype design, product components need to be modified, or information is input during molding, or information is attached to the prototype after molding, which needs to be described, refined and explained in their own sketches. Next, Jinan prototype manufacturer will analyze the product decoration content in the prototype design process.

如果手工板模型是彩色或它的內部是彩色，彩色系統須被確定，這些顏色是由樹脂或涂料，如一種有機顏料被添加到基體樹脂，染料或色粉末樣品提供。涂料體系還須是在終產品中的測試，以確保涂料不會降低樹脂的性能。油漆混合比，如果可能的話，它的組合物應該由賣方提供。

If the manual board model is colored or its interior is colored, the color system must be determined. These colors are provided by resin or coating, such as an organic pigment added to the matrix resin, dye or color powder sample. The coating system must also be tested in the final product to ensure that the coating will not degrade the performance of the resin. Paint mixing ratio, if possible, its composition shall be provided by the Seller.

為基體樹脂的物理性質的有害影響的一些有機顏料不明顯當含量低。有些人可能需要特殊的塑料，需要進行表面處理裝修前，要靜電。如果您需要特殊的處理和準備，你將需要在計劃和生產圖紙繪制。修改以增加標準模型的價值，但如果你不好好變得有缺陷，它會降低利潤，客戶投訴。

The harmful effects of some organic pigments on the physical properties of the matrix resin are not obvious when the content is low. Some people may need special plastics, and static electricity shall be eliminated before surface treatment and decoration. If you need special handling and preparation, you will need to draw in the planning and production drawings. Modify to increase the value of the standard model, but if you do not properly become defective, it will reduce profits, customer complaints.

手板模型設計修飾可用多種方法完成，如模具的修改，著色，貼花，金屬加工，電鍍，等改造工作是在工廠通常完成，但更具體的工作，例如電鍍，金屬加工由外部廠商完成。如果是在戶外進行，將需要聯絡賣家，以確定表面處理修改后的操作要求。可能包括手板，以滿足特殊的清潔需求，或者不需要任何。

The design and decoration of hand model can be completed in many ways, such as mold modification, coloring, decal, metal processing, electroplating, etc. The transformation work is usually completed in the factory, but more specific work, such as electroplating, metal processing is completed by external manufacturers. If it is carried out outdoors, the Seller shall be contacted to determine the modified operation requirements of surface treatment. Handboards may be included to meet special cleaning needs, or no treatment is required.

經常出現的情況是，如果在修飾過程中修飾方法能夠引起手板模型破裂，就需要選擇特定的條件以便降低產品的模塑應力。這種現象在塑料進行表面金屬處理時會經常看到，當它們需要用酸蝕刻時，如果制品內的模塑應力過高，就會導致手板模型制作失敗。

It often happens that if the modification method can cause the prototype to crack during the modification process, specific conditions need to be selected to reduce the molding stress of the product. This phenomenon is often seen when the plastic surface is metal treated. When they need to be etched with acid, if the molding stress in the product is too high, it will lead to the failure of the prototype production.

這些特定的問題需要提出來，以確保在手板模型設為需要修飾的手板模型選擇特定的條件。同時，對材料和手板模型產生影響的修飾過程也需要討論，如清洗溶液、溶劑、蝕刻劑、著色烘干時間和溫度等。從標準生產堆所取的待修飾產品，在模塑后盡可能快的進行終應用檢驗，確保模塑過程沒有導致模塑產品產生應力，這種應力會在修飾過程和終應用過程中出現問題。

These specific problems need to be raised to ensure that specific conditions are selected for the prototype to be modified during the prototype design. At the same time, the modification processes that affect the materials and the prototype also need to be discussed, such as cleaning solution, solvent, etchant, dyeing drying time and temperature. The products to be modified from the standard production stack shall be subject to final application inspection as soon as possible after molding to ensure that the molding process does not cause stress in the molded products, which may cause problems in the modification process and final application process.

分析手板模型設計過程中的產品修飾就講解到這里了，您對此有什么疑惑或者需求，都可以隨時關注我們網站http://www.lzcsaudqhwjqd11.cn聯系到我們，有關人員為您進行竭誠服務！

This is the end of the product decoration in the design process of the analysis prototype. If you have any doubts or needs, you can follow our website at any time http://www.lzcsaudqhwjqd11.cn Contact us, and the relevant personnel will serve you wholeheartedly!