有時候客戶會偶爾反應手板模型使用壽命不長，如果保養不得當會影響其使用周期的。不同材質的手板模型保養時候要注意的地方也會不同。如環境、溫度等的影響很大。針對這個問題，濟南手板生產廠家為大家講解一下其保養注意事項。

Sometimes the customer will occasionally report that the service life of the prototype is not long. If the maintenance is not allowed, the service life will be affected. There are different points to pay attention to in the maintenance of hand models made of different materials. Such as environment, temperature, etc. In response to this problem, the Jinan prototype manufacturer explained the maintenance precautions for everyone.

硅膠材質的手板模型比較容易吸塵，所以存放的時候，好放到陰涼干凈的柜子或者盒子里；不能用重壓或是大力拉扯，不能用鋒利的器具接觸，也不能直接與火源或電接觸，這樣很容易造成損毀；可常用溫熱水清洗，不能用具有腐蝕性的物質清洗。

The silica gel model is easy to vacuum, so it is better to store it in a cool and clean cabinet or box; Do not use heavy pressure or strong pull, do not use sharp tools to contact, and do not directly contact with fire or electricity, which may easily cause damage; It can be cleaned with warm water, not with corrosive substances.

金屬材質的手板模型不要和堅硬的金屬制品磕碰或在搬動的過程中不能用力過猛以免劃花；避免與鹽酸、食鹽、鹽鹵之類的物質接觸以免發生化學反應，可用棉質柔軟的布擦拭可保持光亮和美觀。

The metal hand model shall not collide with hard metal products or use too much force during moving to avoid scratching; Avoid contact with hydrochloric acid, salt, brine and other substances to avoid chemical reaction. Wipe with soft cotton cloth to keep bright and beautiful.

塑膠材質的手板模型受溫度影響較大，盡量不要把它放在陽光直射的地方，因為紫外線會加快塑料老化；避免刮蹭，遠離油品，不要放在潮濕、空氣不流通的地方；要避免暴熱和暴冷環境，防止其熱脹冷縮減短使用周期。

The plastic hand model is greatly affected by temperature. Try not to put it in the direct sunlight, because ultraviolet light will accelerate the aging of plastic; Avoid scratching, keep away from oil products, and do not put them in damp places with poor air circulation; The hot and cold environment shall be avoided to prevent its thermal expansion and cold contraction from shortening the service cycle.

在正確使用手板模型時，還需對手板模型進行定期維護保養，手板模型的導柱、導套及其他有相對運動的部位應經常加注潤滑油，對于鍛模、塑料模、壓鑄模之類手板模型在每模成形前都應將潤滑劑或起模劑噴涂于成形零件表面。

When using the hand model correctly, it is also necessary to carry out regular maintenance for the hand model. The guide post, guide sleeve and other parts with relative movement of the hand model should always be filled with lubricating oil. For the hand model such as forging die, plastic die and die-casting die, the lubricant or mold lifting agent should be sprayed on the surface of the formed parts before each mold is formed.

對手板模型進行有計劃的防護性維護，并通過維護過程中的數據處理，則可預防手板模型在生產中可能出現的問題，還可提高維修工作效率。

Planned protective maintenance of the prototype model and data processing during maintenance can prevent problems that may occur in the production of the prototype model and improve the maintenance efficiency.

要想提高手板模型的質量，須每個環節都要考慮到對手板模型質量的影響，其次還須通過各部門的通力合作。手板模型的質量是手板模型企業自身實力的真實體現。

In order to improve the quality of the prototype model, each link must take into account the impact on the quality of the prototype model, followed by the cooperation of all departments. The quality of prototype model is the real embodiment of the strength of prototype enterprises.

以上是廠家為大家講解有關手板模型保養注意事項了，只要保養得當，其使用周期將會大大廷長，能為企業減少成本預算，希望能夠給您幫助，更多相關事項就來我們網站http://www.lzcsaudqhwjqd11.cn進行咨詢了解吧！

The above is the manufacturer's explanation of the precautions for the maintenance of the prototype model. If the maintenance is proper, the service life will be much longer, which can reduce the cost budget for the enterprise. I hope to help you. More relevant matters will come to our website http://www.lzcsaudqhwjqd11.cn Consult and understand!